SIIG Cyber 2S1P PCI Manuel d'utilisateur

2-1 InstallationChapter 2InstallationThis chapter will guide you through the installation of yourCyber 2S1P. There are no jumpers or switches to set f

2-2Cyber 2S1P User's Manual2. Unplug the power cord from the back of the computer.3. Remove the computer’s cover.4. Select an available 32-bit PC

2-3 InstallationNOTE: Hold the card by its external edgesonly. Try to avoid touching the components,connectors or pins.Fig. 2-2. Install the Cyber 2S

2-4Cyber 2S1P User's Manual2-2 Installing the Drivers and UtilitiesThis section provides information on how to install theCyber 2S1P's drive

2-5 Installation2-2.2 Windows NT 4.0 Driver InstallationThe Windows NT 4.0 drivers and associated files reside inthe NT subdirectory on the Driver In

2-6Cyber 2S1P User's Manual2-2.3 DOS/Windows 3.x UtilitiesFor DOS support, run the dosinst.bat file to copy DOSdriver files cb10xpc.exe, cb10x

2-7 InstallationCB10xsu.exeSpeed ChangeThe default baud rate for the Cyber 2S1P's serial port is115.2Kbps. If you connect a higher speed device,

2-8Cyber 2S1P User's ManualMode ChangeYour Cyber 2S1P supports EPP/ECP, ECP, EPP, andBPP/SPP modes. The default mode setting is EPP/ECP.You