SIIG 5 Guide d'installation télécharger pdf (Page 3)

USB Pin-out Header

The USB pin-out header consists of 4 pins and allows for

1 USB connection.

Important: The internal USB port and the USB Pin-out

Header can not be used at the same time. Do not connect

devices to both ports at the same time.

VCC/+ 5VDC

DATA -

DATA +

GND

Red

Green

White

Black

Figure 2. USB Pin-out Header

Hardware Installation

General instructions for installing the card are provided

below. Since the design of computer cases and

motherboards vary, refer to your computer’s reference

manual for further information, if needed.

Static Electricity Discharge may permanently damage

your system. Discharge any static electricity build up in

your body by touching your computer's case for a few

seconds. Avoid any contact with internal parts and

handle card only by their external edges.

1. Turn OFF the power to your computer and any

other connected peripheral devices.

2. Unplug the power cord and remove your computer's

cover.

3. Remove the slot bracket from an available PCI slot.

1 2 3 4 5 6 7 8

Pas de commentaire

SIIG 5 Guide d'installation Page 3