SIIG JU-H42B22 Guide d'installation télécharger pdf (Page 5)

6. Connect the Type B connector of USB cable into the

upstream port (root port) of the USB 2.0 4-Port Bay

Hub.

Figure 5. Connecting the USB 2.0 Cable

7. Carefully thread the two cables through the drive

bay opening then push the hub assembly into the

drive bay. Align the hub's screw holes with the

appropriate holes in the drive bay, then carefully

attach the hub to the case using the included

mounting screws. Be careful not to overtighten the

mounting screws.

Mounting

Screw

Figure 6. Mounting the Hub Assembly

1 2 3 4 5 6 7 8

Pas de commentaire

SIIG JU-H42B22 Guide d'installation Page 5