SIIG JU-H62B22 Guide d'installation télécharger pdf (Page 5)

Installing the USB 2.0+1394 Bay Hub

Important: In order for the USB 2.0+1394 6-Port Bay Hub

to work properly, the driver of your existing USB 2.0

host adapter and existing 1394 host adapter must be

installed properly.

Assuming your USB 2.0 and 1394 host adapters are

correctly set up with the correct driver, the USB 2.0+1394

6-Port Bay Hub should automatically be detected and

installed when connected.

1. Turn OFF the power to your computer and all

connected peripheral devices.

2. Unplug the power cord from the back of the

computer.

3. Remove the computer’s cover.

4. Select an available 3.5" or 5.25" drive bay for the

USB 2.0+1394 6-Port Bay Hub, remove the cover

plate from the selected drive bay.

Note: When installing the USB 2.0+1394 6-Port Bay

Hub into a 5.25" drive bay install the hub into the

5.25" mounting rack before mounting it into the

drive bay and follow the same assembly

instructions. Refer to 5.25" Mounting Rack

Assembly on page 4.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

SIIG JU-H62B22 Guide d'installation Page 5