SIIG Serial ATA PCI RAID Guide d'installation télécharger pdf (Page 16)

For An Existing Windows 7 (64-bit) Installation

1. Setup your RAID array, and boot up Windows.

2. At the desktop, insert the driver CD. Close the

AutoPlay box if prompted.

3. Right click Computer, click Manage, click Device

Manager.

4. Under Other devices, right click RAID Controller,

click Update Driver Software.

5. Click Browse my computer for driver software.

6. Type D:\64bit, click Next. (Change D: to match

your CD/DVD-ROM drive letter)

7. At Windows has successfully updated your driver

software, click Close to complete the installation.

Go to SATARaid5 GUI on page 24 and install the RAID

monitoring utility.

To Verify Windows 7 Installation

1. Right click Computer, click Manage, click Device

Manager.

2. Double click Storage controllers, and Silicon Image

SiI 3114 SoftRaid5 Controller should be displayed.

Windows Vista (32-/64-bit)

For A New Windows Vista Installation

1. Setup the RAID array prior to Windows installation.

2. Follow Windows installation procedure.

3. At Where do you want to install Windows?, click

Load Drivers.

4. Insert the driver CD, click Browse.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Pas de commentaire

SIIG Serial ATA PCI RAID Guide d'installation Page 16