SIIG Serial ATA PCI Guide d'installation télécharger pdf (Page 6)

6. Press Ctrl+E to exit the BIOS.

7. When asked Are you sure to exit (Y/N)?, press Y to

exit and reboot.

For Manual Configuration

1. As the BIOS boots press Ctrl+S or F4 when prompted

to enter the RAID BIOS.

2. At the next screen select Create RAID Set, then

press Enter.

3. Select Striped, then press Enter.

4. Select Manual configuration, then press Enter.

5. Select the first drive, press Enter.

6. Select the second drive, press Enter.

7. Select the chunk size, then press Enter.

8. When asked Are You Sure (Y/N)?, press Y to accept.

9. Press Ctrl+E to exit the BIOS.

10. When asked Are you sure to exit (Y/N)?, press Y to

exit and reboot.

RAID 1 (Mirror)

For New/Blank Hard Drives

1. As the BIOS boots press Ctrl+S or F4 when prompted

to enter the RAID BIOS.

2. At the next screen select Create RAID Set, then

press Enter.

3. At the next screen select Mirrored then press Enter.

4. Select Auto configuration, then press Enter.

5. When asked Are You Sure (Y/N)?, press Y to accept.

6. Press Ctrl+E to exit the BIOS.

7. When asked Are you sure to exit (Y/N)?, press Y to

exit and reboot.

1 2 3 4 5 6 7 8 9 10 11 ... 29 30

Pas de commentaire

SIIG Serial ATA PCI Guide d'installation Page 6