SIIG ID-DS0711-S1 Guide d'installation télécharger pdf (Page 18)

FAQ

Q1. Why can't ETM.exe detect the Serial over IP Ethernet

Device Server on the network?

A1. Please check the followings: (1) The power adapter

is properly connected and powerd on; (2) The

network cable is properly connected between the

Device Server and the computer; (3) The anti-virus

program and Firewall utility are disabled; (4) The

subnet mask of the computer is the same as the

Device Server (default 255.255.0.0).

Q2. Why the Controller Status on my browser didn't

save the changes after I changed the parameters?

A2. Click Tools on your brower's tools bar, select Internet

option. Select Security, then select Local intranet.

Add this Controller Status webpage (http://

192.168.0.100) to your security zone, the problem

should be solved.

RS-232 / 422 / 485 (Port 2)

7 6 5 4 3 2 1

Pin 1: R- Pin 2: R+

Pin3: T- Pin 4: T+

Pin 7: GND

RS-232

RS-422

RS-485

Pin 3: D- Pin 4: D+

Pin 7: GND

Pin 5: Tx Pin 6: Rx

Pin 7: GND

1 2 ... 13 14 15 16 17 18 19 20

Pas de commentaire

SIIG ID-DS0711-S1 Guide d'installation Page 18