SIIG PCI-2S+DOS Guide d'installation télécharger pdf (Page 10)

Changing COM Port Address

Some serial devices need a specific COM port in order to

work. If your serial device works properly, do not

change this setting.

Windows 95/98/98SE/ME

1. From the Device Manager window double click

Ports (COM & LPT), then double click the

CyberSerial PCI serial port you want to change.

2. Click Settings tab, click the down arrow that is next

to the Port Name box and select a COM address that

is not currently in use.

3. Click OK, then close Device Manager to save the

changes.

Windows 2000/XP/Server 2003

1. From the Device Manager window double click

Ports (COM & LPT), then double click the

CyberSerial PCI serial port you want to change.

2. Click Settings tab and click Advanced.

3. Click the down arrow that is next to the COM Port

number box and select a COM port that is not in use.

Click OK.

4. Click OK, then close Device Manager to save the

changes.

1 2 ... 5 6 7 8 9 10 11 12

Pas de commentaire

SIIG PCI-2S+DOS Guide d'installation Page 10