- 20 -
Map Logical to physical:
If you have multiple spectrometers this provides a setup.
This allows setup of the LU (Logical Unit) to physical unit
address. A similar input is made under the Setup->Unit
menu, however this selection does not deal with the coeffic-
ients. A cross check is also made to determine if multiple
LU's have the same physical address. Each system must have
at least 1 but only 1 unit at physical address 1.
The system can handle LU's 1-8 with physical addresses 1-8.
On the EPP2000 the physical address is set by turning the
rotary dial on the back panel using a jewelers screwdriver.
//////////////////////////////////////////////////////////////////
Actions for peak area icon:
Auto Find Peak:
Cursor attempts to locate peak, otherwise operation uses
current location of the green data cursor.
Continuous mode:
Allows continuous update after clicking peak area icon.
Action terminates when icon is clicked again.
//////////////////////////////////////////////////////////////////
Display Refresh rate:
If you don't like the default setup of 250 milli-seconds,
then change it! We did not want to keep the Windows computer
too busy! The faster the machine, the faster you can go!
This option actually controls how fast the computer does a
scan request to the spectrometer. The data is aquired, then
processed and displayed. The system is prevented from req-
uesting another scan until the current is finished.
//////////////////////////////////////////////////////////////////
Channel Display Colors:
Allows the default trace colors to be altered. Daahhh!
//////////////////////////////////////////////////////////////////
Graph Print Info Prompts:
This powerfull feature allows customization of the graph title
line that is printed. The user is prompted for up to 4 pieces
of information when the graph is printed. Each prompt may be
specified in this setup. Each piece of information is con-
catenated into a single title line along with its short hand
prefix label which is also specified in this setup.
//////////////////////////////////////////////////////////////////
Interface Port and Detector:
During installation, you may have found conflicts in your
Windows computer configuration. SpectraWiz automatically
uses this menu when hardware problems are found.
One can determine the available Port address by
using the Windows control panel under computer resources.
Your hardware interface adapter should be set to an available
Port address using physical jumpers on the cards.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels