SIIG SATA II PCIe RAID Guide d'installation télécharger pdf (Page 9)

6. Input the RAID size, press Enter. When asked Are

You Sure (Y/N)?, press Y to confirm.

7. Select Rebuild Raid 1 Set, press Enter.

8. When asked Are you sure (Y/N)?, press Y confirm.

The mirror will begin rebuilding. Do not interfere

with the process.

9. When rebuilding is finished, press Ctrl+E.

10. When asked Are you sure to exit (Y/N)?, press Y to

exit and reboot.

For Online Mirror Rebuild (in Windows)

1. Replace the failed drive(s) with one of equal or

greater capacity, then start the computer.

2. When Windows resumes, at the SATA SoftRaid 5

screen, click Legacy Support, Rebuild Legacy RAID

Group.

Note: If Legacy Support does not show, click File,

Configuration, Advanced Options. Check Legacy

(Bootable) Support, then click OK.

3. At Rebuild Legacy RAID Group box, select both

hard drives, click Rebuild.

4. Click OK, click Cancel to close the window.

5. The mirror will rebuild. Rebuild time is dependant

on the size of the mirror set.

Deleting RAID Arrays

1. As the BIOS boots press Ctrl+S or F4 when prompted

to enter the RAID BIOS.

2. Select Delete RAID Set, then press Enter.

3. Select the RAID set then press Enter.

4. When asked Are You Sure (Y/N)?, press Y to confirm.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Pas de commentaire

SIIG SATA II PCIe RAID Guide d'installation Page 9