SIIG UltraATA 133 PCI Guide d'installation télécharger pdf (Page 15)

5. Remove the driver diskette and restart Windows to

complete the installation.

When Windows resumes, go to Medley GUI on page 20

and install the RAID monitoring utility.

To Verify Installation In Windows 98SE/ME:

1. Right click My Computer, click Properties, then

click Device Manager.

2. Double click SCSI Controllers, Silicon Image Sil

0680 Ultra-133... Controller should be displayed.

3. Highlight Silicon Image Sil 0680 Ultra-133...

Controller and click Properties. A message This

device is working properly is displayed, the driver has

been correctly installed.

Windows NT 4.0

For A New Installation

1. Setup the RAID array prior to NT installation.

2. Follow Microsoft's NT installation procedure.

3. When booting from Microsoft Windows NT 4.0 CD,

the following screens will appear.

4. Screen 1, Setup is inspecting your computer's

hardware configuration, press F6 key to specify

and add the driver.

5. Screen 2, Windows NT Setup, Setup is loading

files, keep pressing F6 key to add driver.

6. If screen 3 does not appear for options to Specify

Additional Device then shut off system and repeat

steps 4-5 otherwise continue to step 7.

7. Insert the driver diskette and press S.

8. Screen 4, Windows NT Setup, highlight Other and

hit Enter.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Pas de commentaire

SIIG UltraATA 133 PCI Guide d'installation Page 15