SIIG UltraATA 133 PCI Guide d'installation télécharger pdf (Page 17)

2. Highlight Silicon Image Sil 0680 Ultra-133 Medley

ATA RAID Controller from SCSI Adapters listing

and select Properties. A message This device is

working properly is displayed in the dialog box, the

driver has been correctly installed.

Windows 2000

For A New Installation

1. Setup the RAID array prior to Windows installation.

2. Follow Microsoft's Windows 2000 installation

procedure.

3. Restart the computer when prompted.

4. At the Windows 2000 Setup screen, when prompted,

press F6 to install the driver.

5. When prompted press S to specify the location of

the driver.

6. Insert the driver diskette, then press Enter.

7. Silicon Image Ultra-133 Medley ATA RAID

Controller will appear in the box, press Enter.

8. Press Enter to finish driver installation, then follow

the on-screen instructions to complete Windows

2000 installation.

When Windows installation completes, go to Medley

GUI on page 20 and install the RAID monitoring utility.

For An Existing Installation

1. Setup the RAID array prior to driver installation and

boot up to Windows.

2. At the Found New Hardware Wizard, click Next.

3. Select Search for a suitable driver for my device

(recommended), then click Next.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Pas de commentaire

SIIG UltraATA 133 PCI Guide d'installation Page 17